BQT YD30S Cobalt Single Action Electric Lock

The YD30S, known as the Cobalt Single, is a revolutionary low voltage motor-driven door lock for 90º doors. It has been designed to secure single-acting doors and addresses the two biggest issues for electronic locking; 1) the ability to align a misaligned door and 2) the ability to release when requested, even with excessive load on the door.

The Cobalt Single is typically used in commercial doors and controlled by access control systems. This gives the user the ability to control access in and around a facility and provide traffic reports when desired. In addition, the Cobalt Single can be used in a more straightforward system where controlling access to a single door can be implemented with a stand-alone access system.

• Door Gap: 6mm maximum
• Static Strength: 10,000 newtons (2250 lbf)
• Sideload (release on request): 6,000 newtons (1350 lbf)
• Endurance: Cycle tested to 1,000,000 operations
• Bolt Pin: 10mm (3/8") thick, 13mm (1/2") extension
• Alignment: 8mm (5/16") misalignment correction
• Voltage at Lock: 12-24VDC ±15%
• Initial Current Draw: 750mA@12V, 400mA@24V
• Standby Current: 40mA@12V, 25mA@24V
• Monitor Switch Ratings: 30VDC max, 100mA max
• Lock / Strike Plate Material: Stainless Steel 304
• Bolt Pin Material: Stainless Steel 17-4PH
• Compliance and Certification: CE Compliant, RoHS 2 Compliant, FCC Part 15 / IC Compliant, RCM Compliant, UL Listed, EN 14846:2008 Certified, Suitable for use on fire resistant door sets