GS101/GS102 Gingers Spark Single Micro Power Lock With Sdgi Bracket
This Small Micro Power Lock Is An Ideal Lock To Use On Automatic Doors Where Space Is An Issue
£225.00 exc VAT
- 680 kg (1500 lb) holding force per lock
- Multiple voltage input - any voltage from 12 vDC to 24 vDC
- Very low current consumption 12 v = 0.28 A and 24 v = 0.14 A
- Early warning alarm EW technology - magnets are fitted with EW pressure sensors able to send an alarm before access forced open with
- 0-30 second timer delay
- Alarm relay input
- PCB is to be located inside the transom, operator or PSU
- Note that the lock body is rounded and has no sharp edges which gives it a different look and is also safer/less hazardous on low height frames
- For open-out doors the lock is fixed to the SDGi bracket allowing infinite adjustment backwards forwards and sideways
- Armature is on a sliding plate allowing 5 mm travel left and right and 1 mm up and down travel to ensure 100% alignment
- Extremely high quality patented lock and bracket system
- Comes completely assembled so all you have to do is install it
Dimensions
- 116 mm wide on the transom
- 70 mm wide below
- Lock suspends 40 mm below the transom
- Armature is 70 mm W x 26 mm
DATASHEET
Need some help? Call 01746 714695
Or drop us a line.
